Nuand bladeRF x40

Description

Wegen Hobby-Aufgabe... verkaufe ich ein unbenutztes Nuand BladeRF x40 SDR.
Unused Nuand BladeRF x40
For details:
https://www.nuand.com/product/bladerf-x40
Kit contains:
bladeRF x40  (40KLE Cyclone 4 FPGA)
USB 3.0 SS cable
2x SMA cables
Plexi case
Out of the box, the bladeRF can tune from 300MHz to 3.8GHz without the need for extra boards. Through open source software such as
GNURadio
(
live image
), the bladeRF can be placed into immediate use. With its flexible hardware and software, the bladeRF can be configured to operate as a custom RF modem, a GSM and LTE picocell, a GPS receiver, an ATSC transmitter, or a combination Bluetooth/WiFi client, without the need for any expansion cards. All of the bladeRF host software, firmware, and HDL is open source, and
available on GitHub
.
Highlights:
Full-duplex 40MSPS 12bit quadrature sampling
Factory calibrated VCTCXO tuned within 1 Hz of 38.4 MHz
Removable-cap RF shields for increased system sensitivity and isolation
Flexible clocking architecture for arbitrary sample rates
GPIO expansion port (
GPIO Expansion Board
)
SPI flash allows for headless operation
Typical +6dBm TX power