-40%
Malachite Radio Receiver IPS DSP SDR Shortwave + Antenna 50KHz-200MHz 50KHz-2GHz
€ 44.34
- Description
- Size Guide
Description
Malachite Radio Receiver IPS DSP SDR Shortwave + Antenna 50KHz-200MHz 50KHz-2GHzType #1 3.5" 50KHz to 200MHz
Advantages:
- Aluminum alloy shell
- Malahit DSP SDR Receiver
- 3.5" IPS display touch screen
- Default frequency range: 50KHz-200MHz
- Demodulation mode: AM, SSB, NFM, WFM
Product Parameters:
1) The radio is constructed based on SDR principle, and the function is determined by loaded software.
2) The frequency range is from 50 kHz to 200 MHz (default version) / from 50 kHz to 250 MHz, 400 MHz to 2 GHz (registered upgrade version).
3) All types of analog modulation: AM, SSB, NFM, WFM;
4) Powerful functions: variable filter width, adaptive noise suppressor, threshold noise suppressor, Noise Blanker, AGC, equalizer.
5) Use fully functional chip msi001;
6) The powerful stm32h743 with a clock frequency of 480 MHz is applied.
7) 3.5-inch IPS display touch screen.
8) There is a built-in UHF.
9) Control 2 encoders with buttons and touch screen.
10) The power supply is supplied by the external TYPE-C (for Huawei mobile phone) interface and can be charged by TYPE-C. The internal battery voltage is 3.7V and the capacity is 2500mAh.
11) The current consumption when listening to headphones is 300mA.
12) Built-in receiving module in order to improve the HF reception on antenna, an additional board with a source follower has been developed. The board will be built into the standard receiver design.
13) Connect to a computer via USB, you can transmit CAT, IQ and audio.
14) 160 kHz span, with scalability.
15) Sensitivity-Under the condition of up to 250MHz, 0.3μV = 10dB at s / w.
16) Thanks to the characteristics of the msi001 chip used, dynamic blocking range is about 85dB.
17) There is backlight control.
18) SMA female antenna socket;
19) Dimensions 102 x 74 x 29mm (excluding sizes of protrusions).
20) Weight 240g.
Package Included:
1 x SDR Receiver
===============================================================
Type #2 50KHz to 2GHz 3.5inch
50K-2G full frequency receiver offline handheld SDR malachite radio registered version
Malachite SDR registered version 50K-2G
Product parameter introduction:
1) The radio is constructed based on the SDR principle, and the function is determined by the loaded software.
2) The frequency range is from 50kHz to 200MHz (default version)/from 50kHz to 250
MHz, 400MHz to 2GHz (registered upgrade version).
3) All types of analog modulation: AM, SSB, NFM, WFM;
4) Powerful functions: variable filter width, adaptive noise suppressor, threshold noise suppression
Device,
NoiseBlanker, AGC, equalizer.
5) Use the fully functional chip msi001;
6) The powerful stm32h743 with a clock frequency of 480MHz is applied.
7) 3.5-inch IPS display with touch screen.
8) There is a built-in UHF.
9) Control 2 encoders with buttons and touch screen.
10) The power supply and charging are powered by the external TYPE-C interface. Built-in 3.7V 2500mAh Lithium polymer battery.
11) Built-in 8 ohm 1W speaker, consumption current is 300mA.
12) In order to improve the HF reception on the antenna, a built-in receiver module has been developed with a source follower
The add-on board for the add-on. The board will be built into the standard receiver design.
13) Connect to a computer via USB, which can transmit CAT, IQ and audio.
14) 160kHz span, with scalability.
15) Sensitivity-Under the condition of up to 250MHz, 0.3μV=10dB at s/w.
16) Due to the characteristics of the msi001 chip used, the dynamic blocking range is about 85dB.
17) There is backlight control.
18) SMA female (outer screw and inner hole) antenna socket;
19) Dimensions 102X74X23mm (excluding protrusions).
20) The weight is about 300g.
Note: The default standard configuration is only the host; other chargers and antennas are separately equipped.
Register the upgraded version to broaden the frequency and increase CW decoding and other functions.
Note:
- The default standard configuration is only the host; Other accessories, such as antenna are not included, please purchase separately.
- Default frequency range: 50KHz-200MHz. If other frequency ranges are needed, please contact customer service staff to know more details and pay extra money.
- 400 MHz to 2 GHz (registered upgrade version) broadens the frequency and increase CW decoding and other functions.
Payment Method
Returns Policy
Feedback
Payment Method
1. PayPal payment accepted only.
2. Items will be shipped to your eBay address. Please make sure it is correct.
Returns Policy
1. Customer satisfaction is our top goal. We believe our items are so outstanding. All products are quality checked. They are new and in good condition when shipped to our customers. We are convinced you will be happy with your Purchase.
2. If product is defective or damage upon arrival, or wrong product shipped, please contact us immediately. Returns accepted within 14 days of delivery date and item must be in original new condition, not worn or altered in any way with attached tags & wrap. Otherwise deal is final. Return shipping must be paid by buyer.
3. Please contact us first if you have any problems/questions/concerns. We will be happy to resolve any issues you may have in a cordial and friendly manner.
4. We appreciate your Postive Feedback, and will do the same in return. DO NOT leave negative feedback without first communication with us. Please allow max 2 business days for us to response.
Feedback
When you satisfied with our product and services please leave us positive feedback.
If a problem occurs, contact us immediately with any email request. Just contact us using the " Ask the seller a question" link on eBay.
Am 03.06.21 hat der Verkäufer die folgenden Angaben hinzugefügt:
