-40%
3.5" SDR Malachite Receiver LED Display Touch Screen +Antenna 50KHz-200MHz/2GHz
€ 44.34
- Description
- Size Guide
Description
Sales for every weekend!For Raspberry Pi
For Arduino
For Mega2560
Relay
Amplifier
ESP8266
UNO R3
USB/LCD L/C Meter
Power supply
Step up module
Step down module
Adapter Module
Display module
Sensor
Ein-Euro-Artikel
Breadboard Cable and Prototype
GPRS Board
Switch
LED
Cables
Wireless module
Receiver&Transmitter
Servo
3.5" SDR Malachite Receiver LED Display Touch Screen +Antenna 50KHz-200MHz/2GHz
50KHz-200MHz(with antenna /without antenna)
Advantages:
- Aluminum alloy shell
- Malahit DSP SDR Receiver
- 3.5" IPS display touch screen
- Default frequency range: 50KHz-200MHz
- Demodulation mode: AM, SSB, NFM, WFM
Product Parameters:
1) The radio is constructed based on SDR principle, and the function is determined by loaded software.
2) The frequency range is from 50 kHz to 200 MHz (default version) / from 50 kHz to 250 MHz, 400 MHz to 2 GHz (registered upgrade version).
3) All types of analog modulation: AM, SSB, NFM, WFM;
4) Powerful functions: variable filter width, adaptive noise suppressor, threshold noise suppressor, Noise Blanker, AGC, equalizer.
5) Use fully functional chip msi001;
6) The powerful stm32h743 with a clock frequency of 480 MHz is applied.
7) 3.5-inch IPS display touch screen.
8) There is a built-in UHF.
9) Control 2 encoders with buttons and touch screen.
10) The power supply is supplied by the external TYPE-C (for Huawei mobile phone) interface and can be charged by TYPE-C. The internal battery voltage is 3.7V and the capacity is 2500mAh.
11) The current consumption when listening to headphones is 300mA.
12) Built-in receiving module in order to improve the HF reception on antenna, an additional board with a source follower has been developed. The board will be built into the standard receiver design.
13) Connect to a computer via USB, you can transmit CAT, IQ and audio.
14) 160 kHz span, with scalability.
15) Sensitivity-Under the condition of up to 250MHz, 0.3μV = 10dB at s / w.
16) Thanks to the characteristics of the msi001 chip used, dynamic blocking range is about 85dB.
17) There is backlight control.
18) SMA female antenna socket;
19) Dimensions 102 x 74 x 29mm (excluding sizes of protrusions).
20) Weight 240g.
Package Included:
1 x SDR Receiver
Note:
- The default standard configuration is only the host; Other accessories, such as charger and antenna are not included, please purchase separately.
- Default frequency range: 50KHz-200MHz. If other frequency ranges are needed, please contact customer service staff to know more details and pay extra money.
- 400 MHz to 2 GHz (registered upgrade version) broadens the frequency and increase CW decoding and other functions.
Registered version 50KHz-2GHZ
Product parameter introduction
1) The radio is constructed based on the SDR principle, and the function is determined by the loaded software.
2) The frequency range is from 50 kHz to 200 MHz (default version) / from 50 kHz to 250 MHz, 400 MHz to 2 GHz (registered upgrade version).
3) All types of analog modulation: AM, SSB, NFM, WFM;
4) Powerful functions: variable filter width, adaptive noise suppressor, threshold noise suppressor, Noise Blanker, AGC, equalizer.
5) Use the fully functional chip msi001;
6) The powerful stm32h743 with a clock frequency of 480 MHz is applied.
7) 3.5-inch IPS display with touch screen.
8) There is a built-in UHF.
9) Control 2 encoders with buttons and touch screen.
10) The power supply and charging are powered by the external TYPE-C interface. Built-in 3.7V@2500mAh polymer lithium battery.
11) Built-in 8 ohm 1W speaker, consumption current is 300mA.
12) Built-in receiving module In order to improve the HF reception on the antenna, an additional board with a source follower has been developed. The board will be built into the standard receiver design.
13) Connect to the computer via USB, you can transmit CAT, IQ and audio. 14) 160 kHz span, with scalability.
15) Sensitivity-Under the condition of up to 250MHz, s / w is 0.3μV = 10dB.
16) Due to the characteristics of the msi001 chip used, the dynamic blocking range is about 85dB. 17) There is backlight control.
18) SMA female (outer screw and inner hole) antenna socket;
19) Dimensions 102X74X23mm (excluding protrusions).
20) The weight is about 300g.
Note:
50KHz-2GHz
Advantages:
1. 3.5 inch capacitive screen
2. 2-layer board structure, higher performance
3. Adopt a sound unit, 2 vibrating chambers, the speaker (Only one s
peaker
)comes with a sound chamber, the bass sound quality is very full(
Adjustable sound
)
Features:
- DSP SDR Receiver for Malahit
- Capacitive touch screen
- Stlink V2 System
- Default frequency range: 50KHz-2.0GHz
- Demodulation mode: AM, LSB, AM, NFM, WFM,(CW, MIN SNR)
Product Parameters:
1) The radio is built on the principle of SDR-the function is determined by loaded software;
2) Frequency range: from 50KHz to 2.0GHz (Registered version)(No signal between 250-400MHz)
3) All types of analog modulation: AM, LSB, NFM, WFM; (CW, MIN SNR)
4) Powerful functions: variable filter width, adaptive noise suppressor, threshold noise suppressor, for Noise Blanker, AGC, equalizer;
5) fully functional chip msi001;
6) The powerful stm32H 743VIT6 with a clock frequency of 480 MHz is applied;
7) 3.5-inch display touch screen;
8) Controls: 2pcs; encoders with buttons and touch screen;
9) It is powered by an external TYPE-C interface or battery (Built-in battery 3.7V 3800ma ), which can be charged by TYPE-C.
10) Consumption: 300mA when listening to headphones;
11) The reception on built-in telescope or external antenna is to improve the HF reception on telescope antenna, and an additional board with source follower has been developed. The board will be built into standard receiver design.
12) Connect to computer via USB, which can transfer CAT, IQ and audio.
13) 160 kHz span, with scalability;
14) Sensitivity: Under the condition of up to 250MHz, s/w is 0.3μV = 10dB; due to lack of measurement equipment, so the above measurements were not taken;
15) Due to the characteristics of msi001 chip used, dynamic blocking range is about 85dB.
16) With backlight control;
17) SMA female antenna socket;
18) Size:102
x 72
x 22mm
;
How To Turn ON/OFF?
Power on: press once,
Standby state: press once,
Power off:Long Press and hold until you hear a "dididi" sound.
Package Included:
1 Set of SDR Receiver +A
ntenna
(with Aluminum Alloy Shell)
Note:
- With registration code purchased from the official.
- The motherboard can be powered by TYPE-C charger for Huawei mobile phone. It can be equipped with a long wire as an antenna for easy listening.
- Other items pictured are not included, for demonstration purposes only.
Payment
Shipping
Refund
Feedback
Payment
We accept Paypal ONLY. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances.
Shipping
We will arrange shipping for you
within 24 Hours
after payment cleared except the holidays.
We only ship to the confirmed address provided by PayPal. Before you pay, please make sure your address in PayPal matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
-We ship items to Worldwide. Thank you!
-we will ship out the order in
1-2 business days
after payment cleared .Since it is international shipping ,delivery time is about 15--28 business days to arrive to most countries.
Refund
* We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
* If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund to you after the returned item arrived at our warehouse.
* Please include your eBay ID and item number with any email requests.
Feedback
* When you satisfied with our product and services please leave us positive feedback.
* If you have got the package, please confirm "
Delivery on time
" For us.
* If a problem occurs, contact us immediately with any email request.
* Just contact us using the " Ask the seller a question" link on eBay.
Am 24.05.21 hat der Verkäufer die folgenden Angaben hinzugefügt:
